Sunday, July 10, 2011

In Which the Bleach Stencil Process is Demystified

As nice as fabric paint is for stenciling shirts, it will always eventually fade/flake off. If you're looking for a more permanent design or if you're just looking for a different look for your designs, then bleaching might be the way to go. I've made several shirts using this method before, and I now reveal all the secrets involved therein.






Here is everything needed:


-T-shirt (Preferably 100% cotton, but a 50/50 blend will do)
-Bleach
-Masking Tape
-Newspaper
-Empty Spray Bottle
-Spray Adhesive
-Xacto Knife
-Ventilation Mask (optional)
-Latex gloves (optional)
-Stencil



STEP ONE: Get your stencil image, obviously. I picked a random Boba Fett image I found on google images. Bring your image into photoshop and drop the opacity of the image down to 20% or so before printing to save yourself some ink cartridges.




STEP TWO: Print out your stencil. You can go two ways with this: Either print the image directly out onto some heavy cardstock, or go the cheaper way: Print it out on normal paper, then tape that image onto a manila folder, then cut.




STEP THREE: Flip your stencil upside down. Hold your spray adhesive about 6-10 inches away and spray on a full, even coat. Let this sit for about 5 minutes or so to get tacky. (Mask and/or outdoors recommended)







STEP FOUR: Lay your shirt out flat, and press your stencil down. Be sure and pat it down well, especially for stencils with a lot of smaller details.




STEP FIVE: Stuff several layers of newspaper under your stencil inside to shirt, to prevent leakage through to the back (though this can be a neat effect to experiment with). Fold up all other exposed shirt parts behind.




STEP SIX: Tape newspaper over any remaining exposed fabric. Seal this well with masking tape.





STEP SEVEN: Load up your spray bottle with some bleach. Get on the gloves if you are so inclined.







STEP EIGHT: Here's the meat of it. Give your shirt a few good sprays, then dab quickly and softly. Repeat, allowing a decent amount of drying/bleaching time in between each spray volley. I usually go for about 4-5 coats. The goal here is to get the bleach onto the shirt, but to also be getting it off the stencil template. Manila folders don't hold up too well after being soaked. Once the paper gets too wet, the outlines will start to bleed. Keep in mind that the bleach will still be working on the shirt, even if it's not sopping wet, so err on the side of dryness.








STEP NINE: Peel off all the paper. Initially (especially during spraying), the bleach will appear to not do much. It will eat into the shirt's color over time though, so have patience, young padawan. The images below have a time difference of about 10 minutes. The longer it sits, the more it eats in. This can be exploited for lighter shades of stenciling for shading.








FINISH:


Your shirt is done! This process takes a lot of trial and error with all the different factors (shirt type/color, bleach drying time, etc), so keep at it to get your best results. SEVERAL WORDS OF CAUTION:Don't keep bleach in a small sealed container, or it will burst. Always pour the remaining bleach from your spray bottle back into the main container.

I'm in the process of finding a better template material, as the folders are not always reliable (you can see some of the thinner spaces on Boba get a bit scrunched on this one) I usually turn on the shower and soak the shirt a bit and get the bleach out before I toss it in the wash. Then it's a nice permanent design.


11 comments:

lindsay althea said...

THAT.. is a wicked sweet idea. I may that to try it. I LOOOOOOOVE all the other designs you've done too! whoop whoop.

MetalKor said...

Awesome guide man! I've just started stenciling, but i've been getting a lot of practice in, and this guide looks great! Definitely gonna try it out tonight. Thanks!

FourStair said...

Thanks for the demystification! I just spent the day making a set of T-shirts for me and some friends. After two manilla folders tore to pieces from the bleach, my girlfriend suggested we use some thick plastic "Stencil Film" that she had lying around. It worked really well for this.

It's a little pricey, like $5-6 for 4 sheets or so, and it's a little harder to cut the stencil (your xacto knife tends to slip if you're not careful) but it was really durable. If you plan to use a particular stencil multiple times this is definitely the way to go.

Some tips on using the film: Don't wait too long after spraying the adhesive before putting it on the shirt. I was using 3M general purpose adhesive (45, I think), and I got better results waiting only about 1.5 - 2.5 minutes after spraying. Also be aware that the adhesive never really comes off the stencil, so the design may lose some sharpness after several uses.

Hope this helps someone!

Brandon said...

You should try beer / soda boxes. open them up. the outside is painted so it doesn't soak through as easily. i've worked with the stencil film and the xacto knife does slip when cutting, but this cardboard is thinnner than most cardboards and is easier to cut (similar to the manila folders). this method worked well for me!

IndoorDinosaur said...

This is an awesome tutorial! Just a question though, if you wanted to stencil paint a shirt, would you use this same method (simply replacing bleach with paint)? I'd like to try this method, but I also have some designs that would work better in layered paint colors...

Bri (like the cheese) said...

Have you tried freezer paper? You can skip the spray adhesive step & iron them on. You still have to be careful about the paper soaking though, because it is much thinner.

@IndoorDino - yes, use a 'screen printing' paint from a craft store & apply it with a foam brush. Follow the directions on the paint to set it (usually ironing before washing)

Micaela said...

Thanks! That's what I had in my head but great tutorial;)

Micaela said...

Thanks! That's what I had in my head but great tutorial;)

Unknown said...

If I use cardboard instead of a Manila folder, and do not use spray adhesive, do you think the bleach would bleed?
Thankksss

Adam said...

Ellie: Cardboard might bleed , depending on how well you can get it to stick flush against the surface

Unknown said...

hi ,Good information thanks.
Bleached Cotton Comber Suppliers From India